| |
Slit Coil
2B, BA or polished finishes from 0.4 mm to 5.0 mm thickness in Grades
304 / 304L, 321, 316 / 316L, 409 and 430
HRSD finish from 2.0 mm to 5.0 mm thickness in Grades 304 / 304L and
316 / 316L
Sheet
2B, BA or polished finishes from 0.4 mm to 6.0 mm thickness in
Grades 430, 304 / 304L, 321 and 316 / 316L (dependant on thickness)
Plate
HRSD finish from 2.5 mm to 50 mm thickness in Grades 304 / 34L
and 316 / 316L
Other non-standard grades and thicker plate may be available on
request
Bar
Bright round bars up to 406 mm diameter in Grades 304 / 304L, 316
/ 316L, 303, 416 and 431
Bright hexagon bars up to 60 mm A/F / 2.22" in Grades 304, 316,
303, 416 and up to 100 mm square in Grades 304 and 316
Slit & edge rolled or HRSD flat and square bars up to 100 mm x 25
mm
100 mm square in Grades 304 and 316
HRSD angle bars up to 100 mm x 100 mm x 10.0 mm in Grades 304 and
316
Re-bar
HRSD round ribbed bar from 6.0 mm to 25.0 mm diameter in Grades
304 and 316 for reinforcement purposes in the construction industry
Wire
Bright annealed 1.2 mm diameter (25 / 30 kg coils) in Grade 304(L)
for tying purposes in the Construction industry
Other sizes available on request
Tube
Round tube (seamless and welded) from 3.0 mm / 1/8" o/d to 150 mm
/ 6" o/d in Grades 304 / 304L and 316 / 316L square and rectangular
(welded) tube from 10 mm square / 20 mm x 10 mm rectangular up to
150 mm square / 200 mm x 150 mm rectangular (dependant on wall thickness
required) in Grades 304, 316 and 430
Material can be polished as required
Pipe
Seamless and welded from ¼" NB to 16" NB in (ASTM A312) Grades 304L
and 316L (cut to length as required)
These can be supplemented by pipe fittings and flanges on request
Sections
Tubular box sections as above
Channels and angles extruded or pressed (HRSD or 2B) available
on request (polished or cut to length as required)
Please note in our range above we have listed by commonly used AISI
Grades which approximate to the EN numbers detailed below:-
| AISI Grade |
EN |
(old) BS |
| Grade 303 |
1.4305 |
303S31 |
| Grade 304 |
1.4301 |
304S31 |
| Grade 304L |
1.4307 |
304S11 |
| Grade 316 |
1.4401 |
316S31 |
| Grade 316L |
1.4404 |
316S11 |
| Grade 321 |
1.4541 |
321S31 |
| Grade 409 |
1.4512 |
409S19 |
| Grade 416 |
1.4005 |
416S21 |
| Grade 430 |
1.4016 |
430S17 |
| Grade 431 |
1.4057 |
431S29 |
These are for guidance only (the exact equivalent should be checked
against relevant EN Standards as we cannot accept responsibility for
grade selection)
Full details of these grades (as well as other 'non-standard' grades)
within EN standards are available on request
|
